AD1683 static eliminator,
which incorporates a high-voltage power source, is a DC power-operated
small-size device which can eliminate static electricity from charged
objects without the need of an external high-voltage power source.
Since this static eliminator is compact and lightweight with no
fan (no breeze is produced) and requires no high-voltage wiring,
it is very easy to handle. Being of a DC type, it has a remarkable
ability for generating ions.
Can be
easily and safely installed because they require no high-voltage
wiring.
Being
of a DC type, this static eliminator has a remarkable ability
for generating ions and can be used for elimination of static
charges from quickly running or highly electrified workpieces.
Little
or no reverse charge is induced by irradiated ions because
of its excellent ion polarity balance.
Achieves
static elimination with a high degree of efficiency regardless
of the polarity or the potential of the charged object.
Suited
for static elimination in narrow and remote places because
of its lengthy ion irradiation distance.
Produces
only a little amount of ozone thanks to its high ion generation
efficiency.
A current
limiting circuit is incorporated in the ion generating electrode
to reduce the possibility of electric shock
Being
of a DC type, this static eliminator, unlike PULSE-DC, involves
no swing in surface potential of the charged object.
How to install
AD-1683:
Choose the installation site so that the AD-1683 can be placed beside
the electronic balance and a space wide enough to place sample (10cm
to 30cm from the front of the AD-1683) can be secured. Place the
sample in front of the AD-1683 inside the specified area and perform
static elimination. Then, weigh the sample using the electronic
balance.
Figure
1. Example of AD-1683 installation
Figure
2 & 3. Distribution of static eliminating ions
Specifications
Static
Eliminating Method
DC
corona discharge (Bipolar)
Elimination
Range
Distance:Approz.
10 cm to 30 cm from the electode.
Area: 30x30 cm from the electode. (See Figure
2.)
0°C to
40°C, 80% RH or less
Positive discharge pin: 0.07PPM
Negative discharge pin: 0.25PPM
(Measured at a distance of 1cm from each discharge pin.)
Power
Supply
AC adapter.
Please confirm that the AC adapter type is correct for your
local voltage and receptacle type.
Power
Consumption
Approx.
1.5 VA
Discharge
Electrode Pin
Tungsten
(0.9 x 17mm), Life Approx. 10000hrs
Mass
Approx.
300g (including the stand)
Features: The
AD-1683 generates bipolar ions continuously by DC corona discharge
separately from positive and negative discharge electrodes and directs
the ionized air onto the charged body to eliminate static electricity.
The generated ions are well-balanced in polarity and can eliminate
static electricity regardless of the polarity of the charged body.
(see figure 3)
Static Electricity
Generally, insulators such as plastics are prone to be charged with
static electricity when the ambient relative humidity is below 45%
RH. This may affect weighing and cause a measurement error of several
milligrams.
The AD-1683 can eliminate static electricity very effectively.
*Note: Please confirm
that the AC adapter type is correct for your local voltage and receptacle
type. To prevent electrical shock, insert the POWER cable into a grouding-type
outlet and earth ground the grounding cable.
For more information
or to place an order, call (919) 776-7737 or email
us.
Sales,
Service, Calibration,
& Rentals
